Thermostone Plus Polystyrene Swimming Pool Building Blocks PS80/40CODE: 3017050005
- Thermostone Plus Blocks PS80/40
- Quick Swimming Pool Construction, Reducing Labour Costs By 65%
- Smooth, Indent Resistant Walls - Additional PS80 Layer On Internal Wall
- Lightweight Materials Means No Physical Straining
- 3.33 pieces/m² (10 blocks for every 3 square metres)
- 0.14 m³ concrete per m² formworks
- Good Insulation With Thermal Rating Of 0.32W/M²/K
- Dimensions : 1000 mm x 250 mm x 300 mm
PRODUCT INFO:Thermostone Plus - Reliable – Insulating – Quick Assembly
Thermostone Plus is a formwork which is made from expanded polystyrene, allowing the basic pool to be constructed from lightweight blocks, strengthened with steel rebar & then the internal cavities are filled with concrete.
The insulation value of Thermostone Plus block system is much higher than standard construction methods, which means lower heating costs & huge savings on energy.
Unlike other block systems Thermostone Plus Blocks allow the concrete fill to be pumped in up to a depth of 1.75m.
Thermostone Plus PS80/40 have similar characteristics to the original PS40 blocks, but the PS80/40 have an additional layer of PS80 on the pool side, resulting in an exceptionally hard pool wall surface that resists dings, dents and deformities
Calculation Example Number Of Blocks Required As Well As Concrete Filling
|POOL DIMENSIONS (W X L X D)
|THERMOSTONE PLUS QUANTITIES
|250CM X 500CM X150CM
|80 BLOCKS / 3.5m3 CONCRETE
|300CM X 600CM X150CM
|95 BLOCKS / 4.2m3 CONCRETE
|350CM X 700CM X 150CM
|110 BLOCKS / 5.0m3 CONCRETE
|400CM X 800CM X 150CM
|125 BLOCKS / 5.5m3 CONCRETE
|400CM X 1000CM X 150CM
|145 BLOCKS / 6.5m3 CONCRETE
|450CM X 900CM X 150CM
|140 BLOCKS / 6.0m3 CONCRETE
|500CM X 1000CM X 150CM
|160 BLOCKS / 7.0m3 CONCRETE
|600CM X 1200CM X 150CM
|185 BLOCKS / 8.0m3 CONCRETE
F.A.Q: ALL THE ANSWERS YOU NEED TO MAKE AN INFORMED DECISION
Q: How Are Thermostone PS80/40 Installed?
A: Thermostone PS80/40 Blocks Are Laid On Top Of A Reinforced Concrete Base, With The Initial Row Bed In Mortar. Each Additional Row Is Then Glued Onto The Row Below. Rebar Is Run Through The Internal Gaps Until The Desired Pool Height Is Reached, Then Concrete Is Pumped Into The Cavities.
Q: What Size Are The Blocks
A: Thermostone Plus PS80/40 Blocks Are 1000mm Long X 300mm High X 250mm Wide
Q: What Size Are Thermostone Plus PS80/40 Blocks?
A: Each Block Is 1000mm Long x 300mm High x 250mm Wide.
Q: What Is The Thermal Rating Of Thermostone Plus PS80/40 Blocks?
A: The Thermal Rating Is 0.32W/M2/K.
Q: How Much Concrete Will I Need?
A: You Will Need 0.14m3 Of Concrete Per M2 Of Thermostone Plus Formwork.
DELIVERY: We aim to send thermostone plus blocks within 5 days. Stock items are normally sent same day, and delivery made between 2-3 days
thermostone plus blocks are produced to order and as such is classed as a special order and cannot be returned unless there is a manufacturing defect
If there is a manufacturing defect on the thermostone plus block it can be returned in its original packaging, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post. A Returns Number must be obtained before sending goods back.
When we receive the (product), our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.