PRODUCT INFO:
Poolex Nano 5kw Heat Pump
Latest and most advanced heat pump for small pools the Poolex Nano 5.5 is a 5kw compact heat pump with automatic defrost designed to maintain your ideal water temperature. Easy to install the Poolex Nano Plug & Play heat pump is compatible with all small above ground pools up to 30m³, smaller pools will benefit more and it is essential that a solar is used to retain the heat generated. Compact in design the Nano measures just under 40cm in height and operating at a whisper-quiet level (under 30dB) which is really low for a heat pump. The Poolex Nano fits discreetly into small gardens or on patios. For ultimate convenience and normally only available on more expensive units the integrated Wi-Fi allows you to adjust modes and monitor performance remotely via the Poolex app.
-
Key features
Ultra compact design for small pools and limited spaces
Quiet and economical
Maximum COP of 5.4 (A26/W26)
Automatic defrost
Built-in Wi-Fi 2.4GHz (Requires Poolex App)
Heating / Cooling / Automatic modes
Suitable for 32mm/38mm hoses
Heating range from 15-40°C
Works down to -7°C, suitable for extended season use (determined by pool size)
R32 Refrigerant
High quality GMCC compressors
Twisted Tech Titanium heat exchanger, chlorine and salt resistant
Warranty (Return to Base): Heat Pump 2 years, Compressor 5 years and Titanium coil 15 years (against chemical corrosion, except for frost damage)
Supplied with two hose connectors & clamps and 4 anti-vibration pads
F.A.Q: Poolex Nano 5.5 Ultra Heat Pump
Q: How quickly will the Poolex Nano heat my pool?
A: Depending on pool volume, starting temperature, and weather conditions, heating can take from 1.5 to 3.5 days. Using a pool cover can reduce heat-up time by 30-40%.
Q: What size pool is this heat pump designed for?
A: Recommended for pools no more than 30m² surface area (30,000 litres). Optimal performance is achieved in pools 15-20 m² for fastest heating.
Q: Can it be used in cooler weather?
A: Yes, the Poolex nano will work down to lower temperatures but performance as with all heat pumps will reduce the colder the weather. ideal range - ambient temperatures from -5°C to +43°C. Performance is optimal between 15–35°C.
Q: Does it run off a standard plug?
A: Yes, this is a Plug & Play model, supplied with a 3-Pin 13amp Plug. Minimum flow rate needed is 1.4–4 m³/hour.
Q: Is it suitable for salt-water pools?
A: Yes – titanium heat exchanger ensures full compatibility with salt-water pools.
Q: How is it controlled?
A: Full Wi-Fi connectivity allows remote monitoring, temperature adjustment, scheduling, and energy tracking via apps.
