Griffon PVC Glue WDF 05
CODE: H3-RP4L-7GCS
£18.95
IN STOCK
Bon pool Griffon WDF – 2005 PVC glue
Quick adhesive PVC and ABS (Acrylonitrile Butadiene Styrene) glue needed. Brush in cap. For gluing soft, flexible hose, tubes, fitting & Boots both print and drucklosen pipe. Especially suitable for e.g. swimming pools, hot tubs and other areas in wet environments. Suitable for tube diameter up to 160 mm and a maximum pressure of 16 bar (PN16). ABS (Acrylonitrile Butadiene Styrene) up to 5 bar (PN5) Maximum.
Tolerances at Columns, Max. 0.8 mm at hose Max. 0.3 mm The hardness times may vary, depending on the surface, coat primer for product volume, moisture content and ambient temperature.
Quick adhesive PVC and ABS (Acrylonitrile Butadiene Styrene) glue needed. Brush in cap. For gluing soft, flexible hose, tubes, fitting & Boots both print and drucklosen pipe. Especially suitable for e.g. swimming pools, hot tubs and other areas in wet environments. Suitable for tube diameter up to 160 mm and a maximum pressure of 16 bar (PN16). ABS (Acrylonitrile Butadiene Styrene) up to 5 bar (PN5) Maximum.
Tolerances at Columns, Max. 0.8 mm at hose Max. 0.3 mm The hardness times may vary, depending on the surface, coat primer for product volume, moisture content and ambient temperature.
Bon pool Griffon WDF – 2005 PVC glue
Quick adhesive PVC and ABS (Acrylonitrile Butadiene Styrene) glue needed. Brush in cap. For gluing soft, flexible hose, tubes, fitting & Boots both print and drucklosen pipe. Especially suitable for e.g. swimming pools, hot tubs and other areas in wet environments. Suitable for tube diameter up to 160 mm and a maximum pressure of 16 bar (PN16). ABS (Acrylonitrile Butadiene Styrene) up to 5 bar (PN5) Maximum.
Tolerances at Columns, Max. 0.8 mm at hose Max. 0.3 mm The hardness times may vary, depending on the surface, coat primer for product volume, moisture content and ambient temperature.
Quick adhesive PVC and ABS (Acrylonitrile Butadiene Styrene) glue needed. Brush in cap. For gluing soft, flexible hose, tubes, fitting & Boots both print and drucklosen pipe. Especially suitable for e.g. swimming pools, hot tubs and other areas in wet environments. Suitable for tube diameter up to 160 mm and a maximum pressure of 16 bar (PN16). ABS (Acrylonitrile Butadiene Styrene) up to 5 bar (PN5) Maximum.
Tolerances at Columns, Max. 0.8 mm at hose Max. 0.3 mm The hardness times may vary, depending on the surface, coat primer for product volume, moisture content and ambient temperature.
