Plastica 2.9kw AG Mini Heat Pump Plug & Play For Above Ground PoolsCODE: AGMINI
- AG Mini 2.9kw Above Ground Pool Heat Pump
- New Stock Now In
- Plug & Play 2.9kw Heat Pump For Intex & Above Ground Pools
- Heats A 18m3 Pool To 30°C - Works Down To 12°C Air Temperature
- Only 8p Per Hour To Run (0.59kw/hr)
- 2 Year Parts Warranty
DELIVERY: Plastica AG Mini Above Ground Pool Heat Pumps are sent out via a specialist haulier. Delivery takes between 1-3 days.
RETURNS: Plastica AG Mini Above Ground Pool Heat Pumps can be returned unused, in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.
Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870
When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.
Plastica AG Mini 2.9kw Heat Pump For Above Ground Pools is the newest Plug & Play heat pump for above ground pools in the UK. The AG Mini Heat Pump is especially suited to heat small above ground pools up to 18m3.
You will need a conversion kit to connect to Intex or Bestway 1.5" Flexible Pool Hose
These can be ordered at the same time as the AG Mini Heat Pump
The Plastica AG Mini 2.9kw Heat Pump has an inline RCD Breaker connected to a UK 3-Pin plug. and weighing only 23kg allows it to be positioned anywhere in the garden.
With a start up rate of less than 1kw and a running current of only 590w the AG Mini Heat Pump will only cost around 8p per hour to run. Less than £1 per day. When compared to a normal electric heater that costs around £5 per day, you could save enough money in the first year to pay back the initial outlay.
Minimum Flow rate required on AG Mini Heat Pump For Above Ground Pools is 1.3m3/hr
No ByPass Required
A Good Quality Solar Cover Must be Used With This Heat Pump to help during the day and to preserve as much heat as possible at night.
The AG Mini Above Ground Pool Heat Pump is suitable for pools up to 18m3
Below are suggestions for above ground Intex or Bestway pool sizes that the Plastica AG Mini 2.9kw Above Ground Pool Heat Pump is suitable for
Metal Frame Pools
|10ft x 30 inch Metal Frame Pool|
|12ft x 30 inch Metal Frame Pool|
|12ft x 36 inch Metal Frame Pool|
Easy Set Pools
|8ft x 30 inch Easy Set Pool|
|10ft x 30 inch Easy Set Pool|
|12ft x 30 inch easy Set Pool|
|12ft x 36 inch Easy Set Pool|
|15ft x 30 inch Easy Set Pool|