Nano 2.8kw Heat Pump Plug & Play For Above Ground PoolsCODE: NANO28
- Nano Above Ground Pool Heat Pump
- New Stock Now In
- Plug & Play 2.8kw Heat Pump For Intex & Above Ground Pools
- Heats A 10m3 Pool To 30°C - Works Down To 10°C Air Temperature
- Only 8p Per Hour To Run
- 1 Year Parts Warranty
DELIVERY: Nano Above Ground Pool Heat Pumps are sent out via a specialist haulier. Delivery takes between 1-3 days.
RETURNS: Nano Above Ground Pool Heat Pumps can be returned unused, in original packaging, suitable for resale, within 14 days from date of delivery. Returns should be sent via a "Signed For" carrier or post.
Returns Address: Giraffe Enterprises Ltd, Bexley Garden Centre, 57 North Cray Road, Sidcup, Kent. DA14 5EU. Tel: 01322 554 870
When we receive the item, our returns department confirm that everything is present and in its in original condition to ensure its eligibility for refund. We process refunds as quickly as possible. We process most refunds on the same day which they were received, but please allow up to a maximum of 14 days for the money to reach your account. It rarely takes this long, but can happen sometimes for reasons such as bank delays or errors.
Nano 2.8kw Heat Pump For Above Ground Pools is the best made Plug & Play heat pump for above ground pools in the UK. The Nano Heat Pump is especially suited to heat small above ground pools up to 10m3.
You will need a length of hose to connect to Intex or Bestway 1.25" Flexible Pool Hose
These can be ordered at the same time as the Nano Heat Pump
Unlike other small Plug & Play Heat Pumps the Nano Intex Pool Heat Pump is made to the same specification as much larger heat pumps. Weighing Only 18kg it is easy to move and is designed to last for years.
With a start up rate of less than 1kw and a running current of only 530w the Nano Heat Pump will only cost around 8p per hour to run. Less than £1 per day. When compared to a normal electric heater that costs around £5 per day, you could save enough money in the first year to pay back the initial outlay.
Minimum Flow rate required on Nano Heat Pump For Above Ground Pools is 1.3m3/hr
No ByPass Required
A Good Quality Solar Cover Must be Used With This Heat Pump to help during the day and to preserve as much heat as possible at night.
The Nano Above Ground Pool Heat Pump is suitable for pools up to 10m3
Below are suggestions for above ground Intex or Bestway pool sizes that the Nano Above Ground Pool Heat Pump is suitable for
Metal Frame Pools
|10ft x 30 inch Metal Frame Pool|
|12ft x 30 inch Metal Frame Pool|
|12ft x 36 inch Metal Frame Pool|
Easy Set Pools
|8ft x 30 inch Easy Set Pool|
|10ft x 30 inch Easy Set Pool|
|12ft x 30 inch easy Set Pool|
|12ft x 36 inch Easy Set Pool|
|15ft x 30 inch Easy Set Pool|