|
|
| |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
 |
||||
|
||||
 |
Sol+Guard Cover
A Sol+Guard cover is an innovative swimming pool bubble cover material that is sold in roll form to fabricators around the world for commercial and domestic use.
The product has a unique two ply combination, a clear top surface and a translucent tinted underside. Tests carried out, in collaboration with Brighton and London Metropolitan Universities, prove that the more translucent a bubble cover is, the greater the penetration of solar energy into the pool water. This cover is at the top of its class in allowing the maximum amount of solar gain.
The Sol+Guard cover has the ability to provide a variety of benefits to the end-user. This ranges from reducing the heating and maintenance costs and the personal desire to save natural resources, to the practicalities of reducing energy and water usage.
The tough durable 500 micron pool cover materials used for EnergyGuard, CoolGuard and Sol+Guard are formulated for climate conditions in various continents of the world depending on UV (ultra violet) weathering intensity. The Sol+Guard™ and EnergyGuard™ materials are supplied in two UV formulations: one for areas up to 140 kLys/yrs (Kilolangley years) and one for up to 180kLys/yrs. CoolGuard is supplied for areas up to 180kLys/yrs. The additives we use combine weather and chemical resistant pigments with high performance light, weather and chemical stabilisation. The additives used are non-toxic and registered in Australia, Canada, China, EU, Japan, Korea, Philippines and USA.
Increase pool temperature by up to 8°C through solar energy gain
The unique two ply combination of a Sol+Guard cover allows maximum solar gain to pass through the cover increasing the pool temperature by up to 8OC.
Eliminate Water Evaporation by 98% +
With an Sol+Guard pool cover you will be able to eliminate water evaporation by over 98%, thus greatly reducing your water consumption and your water charges, as well as saving a vital natural resource.
Plastipack carried out research, in collaboration with the Brighton and London Metropolitan Universities, which proved that the evaporation loss in the UK for an average sized pool, 4m x 8m, is approximately 32,000 litres per year. This figure is considerably higher for hotter climates.
Reduce Chemical Consumption by up to 30%
A Sol+Guard cover can help reduce chemical losses by evaporation by up to 30% when it is in use. All pool chemical levels and treatment should be maintained at the manufacturers recommended level.
Reduce Energy Consumption by over 50%
A Sol+Guard cover will eliminate evaporation and greatly reduce radiation. Plastipack’s heat retention tests carried out in collaboration with the Brighton and London Metropolitan Universities, showed conclusive energy savings of over 50%. This applied to oil, gas, electric heater or heat pump usage. Where solar heating is used, it is possible to invest in half the amount of panels.
Reduce Debris Contamination
Debris such a leaves, dirt, insects and bird droppings are not only unsightly in a pool but also provide nutrients for algae and bacteria to feed on. When the pool is covered these contaminants will be kept out of the water, greatly improving the quality and appearance of the water.
Save Money
A Sol+Guard cover will save money by reducing water, energy, cleaning and chemical costs. The Sol+Guard pool cover will pay for itself in less than a year.
Warranty
The Sol+Guard cover has a 5 year pro rata warranty. The Sol+Guard™ and EnergyGuard™ materials are supplied in two UV formulations that are covered by our pro rata 5 year warranty.
Environmental Benefits
By reducing the amount of energy needed to heat and filter your pool water, a Sol+Guard cover will greatly reduce your CO2 footprint. It also conserves water and, at the end of its life, a Plastipack cover is 100% recyclable.
|
||||
|
||||
|
Above Ground Pool Solar Cover 200 micron - blue (With free protected sheet)
Above Ground Solar Covers at a discount price. Our 200 Micron Blue Solar Cover will warm the water and reduce your heating costs enabling you to swim longer.
|
||||
|
||||
|
Intex Solar Covers
Intex Swimming Pool Solar Covers are designed specifically for the Intex or Bestway style of pool. All solar covers should float on the water with a gap of a couple of inches (50mm) around the edge of the pool to reduce algae build up and increased alkalinity. They are made from a material that is easy to cut so if you need to trim your covers further you will only need household scissors. At h2oFun we can offer Intex Branded Swimming Pool Solar Covers at a fraction of the retail price. You are guaranteed peace of mind knowing that you are buying the highest quality but without the extra.
|
|||
|
|||
|
Premium Reel
A
pool cover roller is the perfect accessory for
a pool cover. We have rollers available for in
ground and above ground pools. These premium reels
contain a unique anti-spin device locking the
steering wheel in place. Manufactured from aluminium,
they extend from 3.66m to 5.49m (12’ –
18’)
Complete with hardware needed to connect to new or existing covers.
|
||||
|
||||
|
Leading Edge Towing Kit
Manufactured from polyester netting and coated with PVC for extra strength and durability the leading edge can be installed easily on a new or existing pool cover. Polyethylene foam inserts provide the necessary buoyancy.
Comes complete with all necessary fixings and pulling cord.
|
|||
|
|||
|
|
Hot
Tub Spas |
Water
Treatment Chemicals | Swimming Pool Heaters |
Electric Pool Heaters | Heat Pumps | Oil Heaters |
Maintenance
Kits | Pool Pumps |
Pool Filters |
Solar
Covers | Pool Covers
| Solar Sun Rings
|
